Grass Valley K2 Summit Storage Area Network Installation - Manual (Page 146)

Click Next .
You do not need to enter or configure anything on this page.
The FTP Server Configuration page opens.
Configure FTP Server Configuration page - Basic K2 SAN
This page appears only if the server has the role of FTP server.
Do not modify these settings. Leave at default values of Max FTP streams = 4 and FTP Data Socket
Timeout = 60. Only qualified Grass Valley personnel should specify other values, as these settings
are intended for use only with custom systems designed by Grass Valley.
1. Click Next .
The Completing the Configuration Wizard page opens.
2. Click Finish .
The wizard closes. The server restarts.
Wait until all startup processes have completed before continuing.
Proceed as follows:
• If you have NH servers, configure them next.
• If you do not have NH servers, configure K2 clients and/or other iSCSI clients on the K2 SAN
next.
Configuring optional NH servers
If you have one or more optional NH K2 Media Servers, you next configure those servers. This
section applies to both NH1 (1 Gig FTP) servers and NH10GE (10 Gig FTP) servers.
146 K2 SAN Installation and Service Manual 18 November 2010
Configuring and licensing the K2 SAN