Modifying k2 san settings, Accessing k2 san features, About siteconfig and k2config settings – Grass Valley K2 Summit Storage Area Network Installation User Manual
Page 274
It is possible to also override the default credentials for a single device.
Modifying K2 SAN settings
Use the topics in this section when changing or viewing settings on an existing K2 SAN. These are
the settings that define the K2 SAN.
Related Links
on page 274
About SiteConfig and K2Config settings
on page 274
on page 276
on page 276
on page 278
Accessing a K2 SAN from multiple PCs
on page 278
on page 279
on page 279
on page 280
Configuring reference file type on a K2 SAN system
on page 281
Accessing K2 SAN features
In the K2Config, use the following features to K2 SAN settings:
About SiteConfig and K2Config settings
Many settings and operations, such as network settings, adding/removing devices, and software
versions, are managed by both the SiteConfig application and the K2Config application. Each
application has its own XML file in which information is stored. You can keep the applications in
synch by using an orderly task flow as you configure the K2 SAN.
When doing initial installation and configuration tasks, you can export/import system information
from one application’s XML file to the other application’s XML file. You can also merge from
K2Config into an existing SiteConfig system description. These export/import/merge features
support a one-time process in which a system as described in the XML file of one application is
imported into the XML file in the other application. The target XML must not already contain the
system being imported.
274
K2 SAN Installation and Service Manual
18 November 2010
Administering and maintaining the K2 SAN