Grass Valley K2 Summit Storage Area Network Installation - Manual (Page 124)

13. Select Yes…delete all partitions… and then click Next .
If messages appear asking for disks, insert CDs sequentially and click Retry until you can proceed
to the next step.
The Next Selection page opens.
14. Select No, I do not and then click Next .
The Restore Operation option page opens.
15. Do not make any selections. Click Next .
The “…ready to proceed…” page opens.
16. Verify that you are restoring partitions. Click Proceed .
The Operation Progress page opens and displays progress.
17. Insert CDs as prompted. As messages appear asking for disks, insert CDs sequentially and click
Retry .
18. When a “The data was successfully restored” message appears, click OK .
19. Click Operations | Exit to exit the Acronis True Image program.
The K2 Media Server restarts automatically.
20. Remove the Recovery CD while the K2 Media Server is shutting down.
Activating the Windows operating system
If a K2 Media Server is restored to its factory default state or otherwise has the Windows operating
system re-applied, you might need to activate the operating system. This procedure provides
instructions for doing this while the machine is connected to the Internet. The Activation wizard
provides other options, which you can also choose if desired.
To active the Windows operating system on a K2 device, do the following:
1. Make sure the machine is connected to the Internet.
2. From the Windows desktop, in the system tray double-click on the key symbol icon. The Activate
window opens.
3. Select Yes, let's activate Windows over the Internet now and click Next .
4. When prompted, “If you want to register with Microsoft right now.”, select No .
5. Wait for the connection. If the system times out, you are prompted for entering information in
the Internet Protocol Connection dialog. Enter the proxy address and port number as appropriate
for your facility’s connections.
6. Ensure that “You have successfully activated your copy of Windows” message appears in Activate
Windows.
7. Click OK to close the Activate Windows.
124 K2 SAN Installation and Service Manual 18 November 2010
Managing K2 Software