Grass Valley K2 System Guide v.7.2 - Manual (Page 95)

07 April 2010 K2 System Guide 95
Install and configure Macintosh Final Cut Pro systems on K2 storage
This checklist assumes that the K2 system has been installed/commissioned and is
fully operational.
On the K2 system
On all Macintosh client computers
Task Instructions Comment
Configure hosts files on
the K2 system Add Macintosh
systems to the K2
hosts file Enter Macintosh IP
address and name in hosts
files.
Create a Macintosh user
account. This is the
account that the
Macintosh system uses to
log on to the K2 system. Use standard
Windows operating
system procedures. This is not necessary if the
Macintosh system logs on
with the default K2
administrator account
(administrator/adminK2)
Optional: Enable Access
Control Lists, if desired. Topic "Enable
Access Control Lists
on the K2 system" This is optional. If you do
this task, you must also
configure Active
Directory Domain on the
Macintosh systems.
Share V: drive as default/
gvfs_hostname. Use standard
Windows operating
system procedures.
Set permissions to
read only. On a K2 SAN, create the
share on the primary K2
Media Server. Do not
create the share on a SAN
connected K2 client.
Task Instructions Comment
Install Final Cut Pro, if
not already installed. Final Cut Pro
documentation —
Install Flip4Mac, if
necessary for your
workflow. Flip4Mac
documentation This software is optional
Cable network
connections. Connect the
Macintosh system
to the K2 system's
control network. Only the control network
connection is necessary.
Configure for control
network, if not already
done. Topic "Configure
Macintosh systems
for control network" —
Optional: Configure
Active Directory
Domain Topic "Configure
Macintosh systems
for Active Directory
Domain" This is optional. If you do this
task, you must also enable
Access Control Lists on the
K2 system.
Mount the K2 system's
volume default. Topic "Connecting
via SAMBA/CIFS" In the Name field, enter
/.