Grass Valley K2 System Guide v.7.2 - Manual (Page 73)

07 April 2010 K2 System Guide 73
Licensing Pathfire Transfer Service software
destination two for HD. Then click Next .
The Enter default output directory window dialog box opens.
13.Enter the path that specifies the K2 Pathfire capture service watched folder and
then click OK .
In the K2 Capture Services utility, this watched folder is labeled the Source
Directory.
14.In the Destinations window, do one of the following:
• If you require another destination (such as the HD destination), select Configure
destination two and click Next . Repeat previous steps to configure the
destination.
• If all your required destinations are configured, select Done and then click Next .
After a few seconds of inactivity, a series of install windows flash.
When the install is complete the installation programs close and the Windows
desktop appears.
15.Restart (boot) the K2 system using the Windows operating system restart
procedure.
16.Continue with the next procedure “Licensing Pathfire Transfer Service software” .
Licensing Pathfire Transfer Service software
There are two licenses required for operation of the Pathfire capture service, as
follows:
• The Pathfire Transfer Service license, as explained in this section. The license for
Pathfire Transfer Service software is a Pathfire license, not a Grass Valley license.
You must license the Pathfire software on the stand-alone K2 system or the K2
Media Server.
• The K2 Pathfire capture service license, which is a Grass Valley license. Refer to
“Licensing K2 capture service software” on page 86 .
Prerequisites for this procedure are as follows:
• The first DMG Master software, the second DMG Master software, and the DMG
Transfer Service is installed on the K2 system.
• You have procured the license file. Follow the instructions on the Software License
sheet that you received from Grass Valley. You must prepare a text file with unique
system identifiers and send the text file to Grass Valley in order to received license
files.
1. If installing on a K2 Summit Production Client or K2 Solo Media Server, disable
the write filter.
2. Copy the license file to C:\Program Files\pathfire\dmg\skippy\dat.
3. Click Start | All Programs | StartUp | Transfer .
4. Press Ctrl + Alt + Delete . The Windows Security dialog box opens.
5. Click Task Manager . Windows Task Manager opens.
6. In Task Manager, confirm that DMGTransfer.exe is running.