Grass Valley K2 System Guide v.7.2 - Manual (Page 112)

112 K2 System Guide 07 April 2010
Chapter 4 Managing Stand-alone Storage
Utility. If you are opening Storage Utility on a local K2 system, enter the name of
that K2 system. Click
OK .
The Storage Utility logon dialog box opens.
3. Logon to Storage Utility. Make sure you log in with appropriate privileges.
Administrator-level permission is necessary for most Storage Utility operations.
For user name, you might need to enter the machine name as the domain to
successfully log in.
Storage Utility opens.
4. If you are connecting from a control point PC, you should verify that you are
connected to the correct K2 system. To verify this, use the Identify feature to flash
the disks. Refer to
“About identifying disks” on page 114 .
Overview of Storage Utility
Controllers in
Device
Controller
Bound LUNs
LUN
Unbound Disks
Disks
Status area
(displays status of
the selected item)