Grass Valley K2 System Guide v.7.2 - Manual (Page 177)

07 April 2010 K2 System Guide 177
Powering up K2 RAID
19. In the left pane select Device Manager .
20. In the right pane open the System devices node and verify that GVG ISCSI Multi-Path
Device Specific Module is listed.
21. In Storage Utility, make a new file system
If you get a “…failed to remove the media database…” message, you can safely
proceed.
22. Restart the K2 client and log in to Windows.
23. Open AppCenter and manually remove all clips and bins except the default bin and
the recycle bin.
24. Uninstall and then reinstall both SNFS software and K2 Client software. Use the
sequence and detailed procedure in the K2 Release Notes for the version of K2
Client software currently on the K2 client.
25. As you install K2 Client software, when you arrive at the Specify Target Type
page, select K2 with local storage .
26. Restart the K2 client.
27. On a K2 Media Client, from the Windows desktop system tray, open SQL Server
Service Manager and verify that Auto-start service when OS starts is selected. (This
is not required on a K2 Summit Production Client.)
The K2 client is now ready for record/play operations.
NOTE: If you ever unbind LUNs, you must do the above procedure again, starting at
step 5.
Powering up K2 RAID
To power up K2 RAID devices, do the following: