Grass Valley K2 System Guide v.7.2 - Manual (Page 138)

138 K2 System Guide 07 April 2010
Chapter 5 Managing stand-alone K2 systems with SiteConfig
1. Open SiteConfig on the control point PC.
2. In the toolbar, click the discover devices button.
The Discover Devices dialog box opens.
A list of discovered devices is displayed.
3. Click Rescan to re-run the discovery mechanism. You can do this if a device that
you want to discover has its network connection restored or otherwise becomes
available. Additional devices discovered are added to the list.
Assigning discovered devices
Prerequisites for this task are as follows:
• Devices have been discovered by SiteConfig
• Discovered devices are not yet assigned to a device in the system description
• The system description has placeholder devices to which to assign the discovered
devices.
1. If the Discovered Devices Dialog box is not already open, click the discover
devices button .
The Discover Devices dialog box opens.
2. Identify discovered devices.
• If a single device is discovered in multiple rows, it means the device has multiple
network interfaces. Choose the interface that represents the device's currently
connected control connection. This is typically Ethernet ... 0.
• If necessary, select a device in the list and click ID Device . This triggers an action
on the device, such as flashing an LED or ejecting a CD drive, to identify the