Grass Valley K2 System Guide v.7.2 - Manual (Page 141)

07 April 2010 K2 System Guide 141
Modifying stand-alone K2 client managed network interfaces
5. Identify the interface on the discovered device that you are configuring.
• Identify Ethernet LAN adapters by their "Description" name. This is the
Windows connection name. SiteConfig reads this name from the device and
displays it at the top of this dialog box. This is the most accurate way to identify
the network adapter on the discovered device that you are configuring.
• For a K2 Summit Production Client, when you configure its first interface, make
sure you are configuring the 'Control Team' interface.
6. Configure naming settings as follows:
Setting... For network interface Control Team
Interface Name The device host name. Required.
Set To Default Not recommended
DNS Suffix Allowed, if applicable to the network. The DNS suffix is added to the
interface name.
Aliases Not allowed