Grass Valley K2 System Guide v.7.2 - Manual (Page 193)

07 April 2010 K2 System Guide 193
Genlock Reference
Genlock Reference
The K2 Summit Production Client and K2 Solo Media Server specification is shown
in the following table
Embedded Audio Output Output data format is 48 kHz 24-bit
User can disable embedded audio on SDI output
Connector BNC, 75 ohm, No loop-through
nominal Amplitude 800mV peak-to-peak terminated
DC Offset 0 +0.5V
Rise and Fall Times SD: 400 - 1500ps; measured at the 20% and 80% amplitude points
HD: less than 270ps
Jitter less than 0.2UI peak-to-peak
Max Cable Length SD 300 meters
HD 125 meters
Return Loss greater than or equal to 15db, 5Mhz to 1.485Ghz
Characteristic Description
Signal Type NTSC/PAL Color Black Composite Analog
Connectors 2 BNC, 75 ohm passive loop through
Signal Amplitude Lock Range Stays locked to +6 dB and -3 dB
Input Return Loss greater than or equal to 36 dB to 6MHz
Tri-level sync Not supported
Parameter Specification