Grass Valley K2 System Guide v.7.2 - Manual (Page 133)

07 April 2010 K2 System Guide 133
Creating the FTP/streaming network for stand-alone K2 clients (optional)
4. Click OK to save settings and close.
Creating the FTP/streaming network for
stand-alone K2 clients (optional)
If you transfer media to/from the stand-alone K2 client, create a FTP/streaming
network.
1. In the Network Configuration | Networks tree view, select a System node or a Site
node.
2. Proceed as follows:
• To add a network under the currently selected node, in the tree view right-click
the node and select Add Network .
The Network Settings dialog box opens.
3. Configure the settings for the network as follows:
Setting... For control network
Type Ethernet is required
Usage Control is required
Redundancy None is required. This is true even on a redundant K2 SAN. (Only the iSCSI
network is redundant on a redundant K2 SAN.)
Name Control is recommended
Exclude from Host
Files Unselected is required
Managed Selected is required
Base IP Address The first (lowest) IP address in the range of IP addresses managed by
SiteConfig. Required.
Number of Addresses The number of IP addresses in the range managed by SiteConfig. Required.
Subnet Mask The network's subnet mask. Required.
Gateway IP Address Additional network settings managed by SiteConfig. Allowed.
Unmanaged Unselected is required. Related settings are disabled.
DNS Servers Servers providing DNS for name resolution. Allowed.
Default Interface
Name Suffix Not allowed