Grass Valley K2 System Guide v.7.2 - Manual (Page 142)

142 K2 System Guide 07 April 2010
Chapter 5 Managing stand-alone K2 systems with SiteConfig
7. Evaluate settings on the Planned tab and change if necessary.
• Compare settings on the Planned tab with settings on the Current tab.
• If you want to keep the current settings as reported in the Current tab, click
Remove to remove the planned settings.
• Do not specify multiple IP addresses for the same interface. Do not use the Add
button.
• Refer to SiteConfig Help Topics for information about planned and current IP
configuration.
8. To modify planned settings, do the following:
a. Select the network settings and click Edit .
The Edit IP Address dialog box opens.
b. Edit IP address settings as follows:
Use Interface
Name/Aliases in
Host Files Unselected is required. Since not selected, the default behavior occurs, which
is to use the device host name in the hosts file.
Setting... For network interface Control Team
Network Control is required
Address Allocation Static is recommended.
IP Address The IP address for this interface on the network. Required.
Setting... For network interface Control Team