Grass Valley K2 System Guide v.7.2 - Manual (Page 234)

234 K2 System Guide 07 April 2010
Appendix C Connector Pinouts
LTC connectors pinouts
The K2 Summit Production Client LTC panel connector provides balanced linear
timecode input and output connections. The interface conforms to SMTPE 12M
Linear Timecode.
On the K2 Summit Production Client there is one 6 pin Switchcraft TRA6M
Mini-XLR male connector for each channel. Pinouts are as follows:
The mini-XLR to XLR LTC cable has connections as follows:
Pin # Signal Description
1 IN_P<0>
2 IN_N<0>
3 GND Frame Ground
4 OUT_P<0>
5 OUT_N<0>
6 GND Frame Ground
1
2
6
3
4
5
Front view
Front view
Male XLR
Female XLR
Mini Female XLR
1 2
3
1 2
3
FEMALE XLR
MALE XLR
PIN 1
MINI FEMALE XLR
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN 3
PIN 2
PIN 1 GROUND
PIN 1 GROUND
PIN 2
PIN 3