Grass Valley K2 System Guide v.7.2 - Manual (Page 31)

07 April 2010 K2 System Guide 31
RAID drive numbering
RAID drive numbering
In the K2 Summit Production Client, internal RAID drives are numbered as follows.
This numbering is displayed in Storage Utility. You cannot see the labeling on the K2
Summit Production Client chassis RAID drive when you remove the fan module.
In the K2 Solo Media Server, internal RAID drives are numbered as follows:
NOTE: K2 Solo Media Server drives are always configured as RAID 0.
When drives are configured as RAID 0, each drive is considered its own LUN. As
such, the order of LUNs and drive numbers as displayed in Storage Utility does not
always correlate with the position of drives in the chassis.
Disk2 Disk4 Disk7
Disk1 Disk3 Disk6
Disk0 Disk5
Drive numbering Explanation
Disk0 When configured as RAID 1, these two RAID drives make up LUN 0.
Disk1
Disk2 When configured as RAID 1, these two RAID drives make up LUN 1.
Disk3
Disk4 When configured as RAID 1, these two RAID drives make up LUN 2.
Disk5
Disk6 When configured as RAID 1, these two RAID drives make up LUN 3.
Disk7
Disk0
Disk1