Grass Valley K2 System Guide v.7.2 - Manual (Page 131)

07 April 2010 K2 System Guide 131
Creating the control network for stand-alone K2 clients
5. Enter a name for the site you are creating, considering the following:
• Keep the site name short, as it becomes the root identifier that is the default
prefix for device and network names.
• Sites in the tree view are automatically sorted alphabetically.
6. Select Custom and click Next .
7. Click Finish to create the site.
The site is displayed in SiteConfig in the tree view with groups and device
placeholders displayed under the site node. New networks are displayed in the tree
view of networks in the Networks tab.
Creating the control network for stand-alone K2
clients
1. In the Network Configuration | Networks tree view, select a System node or a Site
node.
2. Proceed as follows:
• To add a network under the currently selected node, in the tree view right-click
the node and select Add Network .
The Network Settings dialog box opens.