Grass Valley K2 System Guide v.7.2 - Manual (Page 139)

07 April 2010 K2 System Guide 139
Modifying stand-alone K2 client managed network interfaces
device.
3. To also view previously discovered devices that have already been assigned to a
device in the system description, select Show … currently assigned devices .
The currently assigned devices are added to the list. Viewing both assigned and
unassigned devices in this way can be helpful to verify the match between
discovered devices and placeholder devices.
4. In the row for each discovered device, view items on the Device Id drop-down list
to determine the match with placeholder devices, as follows:
• If SiteConfig finds a match between the device-type discovered and the
device-type of one or more placeholder devices, it displays those placeholder
devices in the list.
• If SiteConfig does not find a match between the device-type discovered and the
device-type of a placeholder device, no placeholder device is displayed in the
list.
5. In the row for a discovered device, click the Device Id drop-down list and select
the placeholder device that corresponds to the discovered device.
If there is no corresponding placeholder device currently in the system description,
you can select
Add to create a new placeholder device and then assign the
discovered device to it.
6. When discovered devices have been assigned, click OK to save settings and close.
7. In the Network Configuration | Devices tree view, select each of the devices to which
you assigned a discovered device.
Modifying stand-alone K2 client managed network
interfaces
Prerequisites for this task are as follows:
• The physical device you are configuring has been discovered and is assigned to a
device in the SiteConfig system description.
• SiteConfig has communication with the device.
• The device is defined in the system description with an appropriate network
interface.
Use this task to modify managed network interfaces on stand-alone K2 client models
as follows:
• K2 Summit Production Client
1. In the tree view select a K2 client, then in the Interfaces list view, identify
interfaces as follows:
• For a stand-alone K2 Summit Production Client, the control network interface
is a team. Modify the control team interface first. The control team is comprised
of two individual interfaces, one for Control Connection #1 and one for Control
Connection # 2. If these individual interfaces are displayed, do not modify them.