Grass Valley K2 System Guide v.7.2 - Manual (Page 190)

190 K2 System Guide 07 April 2010
Appendix B Specifications
AC power specification
The K2 Summit Production Client specification is shown in the following table.
The K2 Solo Media Server specification is shown in the following table.
WARNING: Always use a grounded outlet to supply power to the
system. Always use a power cable with a grounded plug, such as the one
supplied with the system.
Environmental specifications
The K2 Summit Production Client and K2 Solo Media Server specification is shown
in the following table.
Characteristic Specification
Power supply Dual, redundant
Mains Input Voltage 90 to 260V auto-range, 47-63Hz
Power consumption 450W typical (standalone)
300W typical (SAN client)
Maximum AC current 4.5A @ 115VAC, 2.3A@230VAC
Characteristic Specification
Power supply Single
Mains Input Voltage 100-240V, 50/60 Hz
Power consumption 180W typical
Maximum AC current 4.5A @ 115VAC, 2.3A@230VAC
!
Characteristic Specification
Ambient Temperature
Non-Operating -40° to +60° C
Ambient Temperature
Operating 10° to +40° C
Relative Humidity Operating 20% to 80% from -5 to +45 C
Non-Operating 10% to 80% from -30 to +60 C
Do not operate with visible moisture on the circuit boards
Operating Altitude To 10,000 feet
IEC 950 compliant to 2000 meters
Storage Altitude To 40,000 feet
Non-Operating
Mechanical Shock 30G 11 ms trapezoid