Grass Valley K2 System Guide v.7.2 - Manual (Page 50)

50 K2 System Guide 07 April 2010
Chapter 3 System connections and configuration
Sample K2 client configuration and hosts file
The following diagram illustrates one possible configuration setup, including a K2
system with stand-alone storage, K2 clients with shared (SAN) storage, and other
Grass Valley systems.
The following example shows the contents of a default Windows hosts file with
new lines added that match the IP addresses and host names in the previous sample
diagram.
All lines beginning with a # are comments and can be ignored or deleted.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1localhost
10.16.42.10K2-Client
10.0.0.10K2-Client_he0
K2-Client
(internal storage)
Stand-alone
NewsEdit1
(not shared storage)
SAN_XP1
SAN_UIM1
K2-Client-2
(shared storage)
K2-Media Server-1
Control Point PC
10.0.0.22
Other 3rd party devices
Command/Control network
FTP/Streaming network
10.16.42.10
10.0.0.10
10.16.42.102
10.16.42.60
10.0.0.60
Note: The two media GigE ports are not used for
FTP/streaming. They are used for media (iSCSI)
networks only
10.16.42.22
10.16.42.31
10.16.42.32
10.0.0.32
10.16.42.23
K2-Client-1
(shared storage)
10.16.42.101