Grass Valley K2 System Guide v.7.2 - Manual (Page 72)

72 K2 System Guide 07 April 2010
Chapter 3 System connections and configuration
4. Open DMGMASTER.exe.
InstallShield Wizard opens and extracts files.
The Pathfire Digital Media Gateway Installation program opens and runs
installation processes. This takes approximately two minutes. When installation
processes are complete, the DMG Install Complete dialog box displays.
5. In the DMG Install Complete dialog box, respond as appropriate to restart and
allow the K2 system to restart.
6. Continue with the next procedure “Install DMG Transfer Service software” .
Install DMG Transfer Service software
Prerequisites for this procedure are as follows:
• The first DMG Master software and the second DMG Master software is installed
on the K2 system.
Transfer Service has the capability to transfer HD content and SD content. However,
HD does not transfer to a SD destination nor does SD transfer to a HD destination.
Therefore, if both types of content flow through the Transfer Service process, they
each require their own destination.
1. If installing on a K2 Summit Production Client or K2 Solo Media Server, disable
the write filter.
2. If you have any files in C:\temp that you want to save and you have not already
done so, copy the files to a different location.
3. If you have not already done so, make the contents of the Pathfire Transfer Service
CD-ROM accessible to the K2 system.
4. Open DMGTRANSFER.exe.
InstallShield Wizard opens and extracts files, then the Pathfire Digital Media
Gateway Installation program opens.
5. In the Information window, click Next .
6. In the Type window, select Server Connect for Programming and then click Next .
7. In the Destinations window, select Configure destination one and then click Next .
If SD and HD destinations are required, configure the SD first.
8. In the Enter Text window, type the name of the K2 system on which you are now
installing the Pathfire software.
This name does not have to match any DNS names or computer names. However,
it should be a name that is recognized when working in the Destinations window
of the Pathfire DMG application.
9. In the Destinations window, click Next .
10.In the next Enter Text window, type a description that applies to the K2 system on
which you are now installing the Pathfire software, and then click Next .
11.In the Transfer Engine window, select DirectConnect and then click Next .
12.In the Video Resolution window, select the video resolution for this destination. If
SD and HD destinations are required, configure destination one for SD and