Grass Valley K2 System Guide v.7.2 - Manual (Page 51)

07 April 2010 K2 System Guide 51
Streaming video between K2 systems
10.16.42.101K2-Client-1
10.16.42.102K2-Client-2
10.16.42.22K2-MediaServer-1
10.0.0.22K2-MediaServer-1_he0
10.16.42.23ControlPointPC
10.16.42.60NewsEdit1
10.0.0.60NewsEdit1_he0
10.16.42.31SAN_XP1
10.0.0.32SAN_XP1_he0 SAN_UIM1_he0
10.16.42.32SAN_UIM1
Add host names to AppCenter to enable streaming
In K2 AppCenter, you must add the host names of all peer K2 systems on the network
that support streaming transfers. Adding host names is required to allow selection of
networked K2 systems in the AppCenter user interface and to provide a successful
network connection for streaming. The host names added appear in the “Import” and
“Send to” dialog boxes.
NOTE: By default, the K2 system host name is the same as the Windows computer
name. To determine the K2 system computer name, right-click K2 Client or K2 Media
Server (My Computer) on the Windows desktop, then properties. Select the Network
Identification tab and look for the “Full computer name”.
To add network host names:
1. Open AppCenter for the K2 client.
2. In the AppCenter toolbar, select System , then choose Configuration .
3. Select the Remote tab.
The Remote Settings dialog box displays, showing any network host names that
have been added.
4. Select Add , to open the Add Host dialog box, then do the following:
a. Select the Host name field, then enter the computer name of a peer K2 system.
Make sure to enter the exact computer name. Any differences will result in being
unable to connect to the K2 system.