Grass Valley K2 System Guide v.7.2 - Manual (Page 136)

136 K2 System Guide 07 April 2010
Chapter 5 Managing stand-alone K2 systems with SiteConfig
• K2 Summit Production Client
1. In the Network Configuration | Devices tree view, select a stand-alone K2 client
placeholder device.
The interfaces for that device are displayed in the interfaces list view.
Edit the control network interface first.
2. In the interfaces list view, right-click an interface and select Edit .
The Unmanaged Network Interface Details dialog box opens.
3. Configure the settings for the interface as follows:
Setting... For control network interface
Network Control is required
IP Address The IP address for this interface on the network. Required.
Interface Name The device host name. Required.
Set to Default Not recommended. Sets the interface name to SiteConfig default convention,
based on the root Site name and device-type.