Grass Valley K2 System Guide v.7.2 - Manual (Page 151)

07 April 2010 K2 System Guide 151
Chapter
6
Managing K2 system software
This chapter contaK2 Edge Transmission Serverins the following topics:
• “About K2 system software”
• “Installing Control Point software”
• “Installing K2 software”
• “Backup and recovery strategies”
About K2 system software
Check K2 Release Notes for the latest information about software.
At the time of this writing, the primary software installations for the K2 Summit
Production Client and K2 products are as follows:
In addition, the following software is installed in special cases:
• Multi-Path I/O software — You must install this software on K2 Summit
Production Clients and K2 Media Clients that are part of a redundant K2 SAN and
This
software… Is distributed
on…
With the installation file located at…
Which is
installed on… And is described as
follows:
K2 Client The K2 System
Software CD
and via
download ..\K2Client\setup.exe K2 Summit
Production
Clients and K2
Media Clients Provides core functionality
for all K2 clients models.
K2 Server The K2 System
Software CD
and via
download ..\K2Server\setup.exe K2 Media
Servers Provides core functionality
for all K2 Media Servers in
all roles.
Control
Point The K2 System
Software CD
and via
download ..\ControlPoint\setup.exe Control Point
PCs Provides remote control
and configuration of K2
clients (both internal and
external storage) as well as
the K2 SAN.
Media File
System
(SNFS) The K2 System
Software CD
and via
download ..\snfs\gvSnfsxxSetupK2.bat K2 Media
Servers,
stand-alone K2
clients, and
shared storage
(SAN) K2
clients Provides a dedicated file
system for access to media
data. Install only as
instructed by release notes.
NetCentral The NetCentral
Manager CD ..\ServerSetup.exe The NetCentral
server PC (this
can be a
Control Point
PC) Provides remote
monitoring of all K2
products.