Grass Valley iTX System v.2.6 - Manual (Page 60)

Installing iTX software modules
down to, or up from, the start of an event. The counts happen at specified intervals; they
correspond to the Now and Next timecode displays on the Channel Control layout.
The recordings for the voice counts are contained in .wav files which the installer places in a
folder on the workstation. In the same folder, it places the files that control the timing of the
counts. The default path to the folder is:
C:\Program Files\iTX 2.0\Applications\Desktop\Digital Dorothy
There are three timing-control files: CountIn.txt, CountOut.txt and CountTo.txt. In these, a
single line sets each count. The line contains two elements, separated by a colon: the time (in
seconds) of the count from the start of the event to which it applies; the name of the .wav file
used for the count.
For example, the line for the count at 10 seconds from the start of the event reads:
10:10.wav
You may replace the existing recordings with ones of your own; you may edit the timing-control
files to vary the count intervals.
Install the Software Distributor module on a stand-alone machine
We recommend you install the Software Distributor module on the system-administrator
machine; this enables you to upgrade system servers from your system-administrator
workstation.
1.
Double-click Setup.exe to start the iTX installer.
2. When the installer displays the Select Software To Install dialog, select Software
Distributor.
Click OK.
The installer displays the iTX Installer dialog, showing the Software Distributor component
selected for installation.
3. Click Continue.
The installer performs the installation. During this process, the installer displays a dialog
requesting you for domain details.
In the iTX Domain Configuration dialog, enter domain and Locator Service information.
More details , page 46.
The installer completes the installation of the Software Distributor module.
4. Click Finish to close the iTX Installer dialog.
On successful installation of the Software Distributor module, a folder for the installed
components appears in the Program Files\iTX 2.0\Services folder. The installed service is:
• The iTX Software Updater
March 2015 System Administrator Guide Page 60 of 404