Grass Valley iTX System v.2.6 - Manual (Page 270)

Working with iTX services on an Encode Server machine
Under the Settings tab are a number of features for performing system-administration tasks in
the channel provided by the Encode Server. After changing any settings, save them by clicking
Save.
Select a Media Watcher for file registration
The Media Watcher registers encoded media files in the System Database. In a system with
multiple Media Watchers, you need to select one of them to perform this task.
1.
Click Refresh to update the list of Media Watchers.
2. Select a Media Watcher in the Media Watcher box.
Import encode presets
The Encode Presets box displays a list of encode presets that are to be available for recordings;
these determine the video properties (storage format, bit rate, etc.) of the files created by an
Encode Server.
The first time the Encode Server is installed, there are no encode presets on the machine; the
Encode Presets is blank. You need to import encode profiles from the installation folder. For
this you use the Manage Global Presets dialog:
1.
Click Manage to display the Manage Global Presets dialog.
2. Do the following to select presets to import.
• Select the Import tab.
• Click Import to display the Select One Or More Presets dialog.
• Open the Presets folder in the iTX installation folder.
• Select the presets you want to import; close the dialog.
• Click Close to close the Manage Global Presets dialog.
The Encode Presets box displays a list of the imported encode presets. (Click Refresh if it
does not.)
Note: You can use the Manage Global Presets to delete or export encode presets.
March 2015 System Administrator Guide Page 270 of 404