Grass Valley iTX System v.2.6 - Manual (Page 190)

Configuring channel plug-ins
Then do one of the following to set the vision effect for the template in-point.
•
Click a transition-type selection button, for a cut or cross-fade transition.
• Click Wipe, Slide or Squeeze to select a type of effect; click one of the arrow buttons to
select the direction; enter a value in the In box to set the duration of the effect.
4. Click Out, to select the out-point settings. Then repeat the previous step (but specify a
duration in the Out box for any effect you select) to set the vision effect for the CG out-
point.
5. Click Save.
iTX updates the CG template properties.
Map a graphics-script template to a graphics script
In a schedule that is in the format defined by the iTX Import Protocol, graphics events may
feature graphics-script templates. To enable iTX to play out such events, you need to map the
templates to graphics scripts in the iTX system.
After selecting a playout channel, perform this procedure for each graphics-script template that
appears in imported schedules.
1.
Select GFX on the Schedule Import Configuration panel.
2. Click Create.
iTX opens the Enter Template Name/Number dialog.
3. In the Name box, enter the name or number of the graphics-script template as it appears
in imported schedules.
For example, enter "Breaking News" for the graphics script in this schedule entry:
ITEM
clip GFX
data Breaking News|1:Live Report|
...
end
4. Click OK to close the dialog.
iTX opens PinPoint, the iTX search tool.
5. Use PinPoint to select a graphics script from the iTX System Database.
When you close PinPoint, iTX displays the template name or number in the Template box
and the name of the graphics-script in the CG Page box.
The Save button flashes; this is to show there are unsaved changes.
6. Click Save to save the graphics-script mapping.
iTX associates the graphics-script template with the graphics script.
March 2015 System Administrator Guide Page 190 of 404