Grass Valley iTX System v.2.6 - Manual (Page 212)

Configuring the audio output for a playout channel
Testing a channel-mapping configuration
From the Audio Mapping panel, you can test the audio mapping for a selected media file. When
you do this, iTX creates a report that lists all available audio tracks and describes the effect of
the configuration. It displays the report in the Report Viewer:
Below is an example of a test report for a clip with 8 audio tracks.
Mapping XML:
Clip track info:
Test Clip
Audio track0 : Group0 ITA, 00:00:30 ms, 1 channels, 24 bit, 48000
hz, PCM, PCM
Audio track1 : Group1 ITA, 00:00:30 ms, 1 channels, 24 bit, 48000
hz, PCM, PCM
Audio track2 : Group2 NLD, 00:00:30 ms, 1 channels, 24 bit, 48000
hz, PCM, PCM
Audio track3 : Group3 00:00:30 ms, 1 channels, 24 bit, 48000 hz,
PCM, PCM
Audio track4 : Group4 00:00:30 ms, 1 channels, 24 bit, 48000 hz,
PCM, PCM
Audio track5 : Group5 00:00:30 ms, 1 channels, 24 bit, 48000 hz,
PCM, PCM
Audio track6 : Group6 RUS, 00:00:30 ms, 1 channels, 24 bit, 48000
hz, PCM, PCM
Audio track7 : Group7 SLV, 00:00:30 ms, 1 channels, 24 bit, 48000
hz, PCM, PCM
Mapping:
Output 0 maps to track 0, will play audio type as
Stereo> based on
Output 0 maps to track 1, will play audio type as
Stereo> based on
Total Pins: 2
Faults:
Final Output Mapping XML:
March 2015 System Administrator Guide Page 212 of 404