Grass Valley iTX System v.2.6 - Manual (Page 319)

Using iTX with a matrix router
• Select the Router Bridge window.
• Select the Conflict Resolution tab.
• Click Refresh the crosspoints Name and Alias from the G2 database.
The Routing Data Service refreshes the crosspoint list in the System Database; it overwrites
existing information with information that the Router Bridge reads from the device drivers.
Copy selected information from the Router Bridge to the System Database
For this procedure, you use the features under the Conflict Resolution tab of the Router Bridge
window. Under the tab, there are two lists:
• The upper list shows crosspoint details in the System Database that are different from
the corresponding crosspoint details in the Router Bridge memory. You can select
crosspoints in the list and copy their details from the Router Bridge to the System
Database.
• The lower list contains details of crosspoints that have been added to, or removed
from, the Router Bridge memory but not the System Database. You need to delete
non-existent crosspoints from the System Database to ensure operators do not try to
use them.
For both lists, you view sources and destinations alternately.
1.
Select the Router Bridge window.
2. Select the Conflict Resolution tab.
March 2015 System Administrator Guide Page 319 of 404