Grass Valley iTX System v.2.6 - Manual (Page 121)

Setting up views for workstations and operators
Remove a layout from a layout view
1. Select a workstation or user layout view in the Desktop View Manager.
2. Select a layout in the Workstation View or User View list of the Desktop View Manager.
3. Click << Remove.
The Desktop View Manager removes the layout from the list.
4. Click Save to save the layout view.
Refreshing a layout view
To display a workstation view after modifying it, you need to restart the iTX Desktop at the
workstation.
After you modify the user view of an operator, the operator needs to restart the iTX Desktop at
any workstation.
About channel views
A channel view is a group of channels of any type – playout, edit, cache or ingest – that are
accessible to all operators at a particular workstation. It is a property that you assign to
workstations (not to individual users).
Channel-selection components display a selection button for each channel in a selected
channel view. An example is the Channel Selector on the Channel Control layout, shown in this
illustration:
Through the channel selection buttons, an operator selects a single channel to work with.
You can assign more than one channel view to a workstation. An operator then selects one of
these views by using the Channel View Selector:
Enabling a workstation to work with a particular channel view is a two-step process: you first
create the channel view; you then assign the channel view to the workstation. You perform
these tasks on the Channel View Management pop-up layout.
March 2015 System Administrator Guide Page 121 of 404