Grass Valley iTX System v.2.6 - Manual (Page 191)

Configuring channel plug-ins
Set default playout properties for a graphics-script template
You can assign default properties to a mapped graphics-script template; for example, its in- and
out-transitions.
1.
Select GFX on the Schedule Import Configuration panel.
2. Select a mapped graphics-script template in the Template box.
3. Click In, to select the in-point settings:
Then do one of the following to set the vision effect for the template in-point.
•
Click a transition-type selection button, for a cut or cross-fade transition.
• Click Wipe, Slide or Squeeze to select a type of effect; click one of the arrow buttons to
select the direction; enter a value in the In box to set the duration of the effect.
4. Click Out, to select the out-point settings. Then repeat the previous step (but specify a
duration in the Out box for any effect you select) to set the vision effect for the graphics-
script out-point.
5. Click Save.
iTX updates the graphics-script template properties.
Delete all mappings for CG and graphics-script templates
1. On the Schedule Import Configuration panel, click Delete All.
2. Click Save.
iTX removes all mapped CG and graphics-script templates from the Schedule Import
Configuration panel.
March 2015 System Administrator Guide Page 191 of 404