Grass Valley iTX System v.2.6 - Manual (Page 252)

Working with iTX services on an Output Server machine
Output Server 1 – Engineering tab
Under the Engineering tab are a number of controls for performing engineering tasks in the
channel provided by the Output Server.
Note:
• This section is only available to channels running the Output Server 1 service. For
channels running Output Server 2 see the Output Server 2 Channel Configuration
Guide.
• The controls in the Debug panel are for the use of software developers, to help with
troubleshooting in the event of system problems. The controls are not used when the
Output Server is running normally.
• Do not select Show errors in the video window unless iTX Support ask you to do so.
Request the Output Server to create a log file
1. Click Snapshot if you want to record the recent activity of the Output Server in a log file.
The default path of the folder in which iTX stores the log files is:
C:\iTXLogs.
You may increase the amount of detail in logs by selecting a higher value (possible values
range from 0 to 3) in the Verbose Logging Level box.
March 2015 System Administrator Guide Page 252 of 404