Grass Valley iTX System v.2.6 - Manual (Page 215)

Configuring the audio output for a playout channel
• Select a tag in the Available Language Codes pane; click Add to add it to the Selected
Language codes pane. Do this for each tag you want to add. You may add multiple tags
together by using the Shift or Control key to select them as a group before clicking
Add.
• To remove a tag from the Selected Language Codes pane, select it and click Remove.
• If you add multiple tags to the Selected Language Codes pane, ensure they are listed in
order of priority; the tag for most preferred language should be at the top. To re-
position a tag, select it and click Up or Down.
• Click OK to close the dialog.
3. If you want to specify the number of a source group, select one from the Group dropdown
list.
4. Click Save on the Channel Configuration Tool.
Note:
• You can modify the list of tags in the Available Language Codes pane. See below,
"Modifying the list of available track tags in the Language Selection dialog".
Display the XML code for a channel-mapping configuration
1. On the Audio Mapping panel, click XML.
iTX opens the XML Viewer; this shows the XML code for the channel mapping of the
configured audio tracks.
Display a report showing the audio-track details for a video clip
1. On the Audio Mapping panel, select the Media tab.
2. Click Media Test to open the Report Viewer; this appears blank.
3. Click Select Media to open PinPoint, the iTX search tool.
4. Select a video clip and close PinPoint.
iTX displays a report for the clip in the Report Viewer.
The report gives details of the channel-mapping configuration, the audio tracks in the clip,
and the tracks selected for playout.
March 2015 System Administrator Guide Page 215 of 404