Grass Valley iTX System v.2.6 - Manual (Page 151)

Configuring channels
As Run Start
This setting is only relevant for as-run logs in text files.
By default, an as-run log records schedule events that take place in the 24 hours of any given
day. In the AsRun Start box, you can specify a start time so that iTX creates as-run logs for an
offset 24-hour period; for example, from 4 a.m. one day to 4 a.m. the next .
In an as-run log with an offset, the hour figures increase past midnight on the second day (e.g.
25:00:00:00 represents 1 a.m.).
Standby Video
In the Standby Video box, you can specify a video clip for iTX to play out if it cannot play the
media file in a schedule event. iTX plays out the standby video – instead of a configured
breakdown slide – until the next event. For this setting, you need to enter the path and
filename of a video clip.
Clicking C (to the right of the Standby Video entry) clears the selection.
If you do not specify a standby video clip, iTX displays the breakdown slide; you configure this
under the Channel Config 4 tab.
Wide Screen Switch
For an SD channel, you select Wide Screen Switch if you want iTX to embed a WSS (widescreen
signalling) stream in the transmission signal. This stream describes the aspect ratio (4:3 or 16:9)
March 2015 System Administrator Guide Page 151 of 404