Comtech EF Data CDM-600/600L - Manual (Page 59)

CDM-600/600L Open Network Satellite Modem Revision 3
Installation MN/CDM600L.IOM
2–3
Equipment Rack
Rear Mounting Rail
#10 Shoulder Screw
#10 Bracket Bolt
Support Bracket
Back of unit
#10 Split Washer
#10 Flat Washer
#10 Flat Washer
#10 Hex Nut
Figure 2-1. Optional Rear-Mounting Support Brackets Installation
2.3 Configuration
The unit ships with a default 64 kbps, QPSK, Rate 1/2 configuration. There are no internal
jumpers to configure, no interface cards to install, and no other options to install: all
configurations are carried out entirely in software.
The unit should first be configured locally, using the front panel keypad and display. Refer to
Chapter 5. FRONT PANEL OPERATION for details on how to fully configure the unit for the
desired operating parameters.
Note: The auto-sensing AC power supply does not require any adjustments. Simply plug in the
supplied line cord, and turn on the switch on the rear panel.