Comtech EF Data CDM-600/600L - Manual (Page 113)

CDM-600/600L Open Network Satellite Modem Revision 3
Front Panel Operation MN/CDM600L.IOM
5–37
5.6.12 INFO-MISC
MISCELLANEOUS: NORMAL
1:1 SWITCH = NOT CONNECTED ONLINE
This screen shows the following:
• Operational Mode (Test Mode or Normal)
• 1:1 Link Status
• Redundancy Status: Offline or Online
5.7 SELECT: MONITOR
CDM-600L:
MONITOR: LIVE-ALARMS STORED-EVENTS
STATISTICS RX-PARAMS AUPC-PARAM LNB BUC
CDM-600:
MONITOR: LIVE-ALARMS STORED-EVENTS
STATISTICS RX-PARAMS AUPC-PARAMS
For the CDM-600L: Select Live-Alarms, Stored-Events, Statistics, Rx-Params, AUPC-
Param, LNB, or BUC using the [
←][→] arrow keys, then press [ENT].
For the CDM-600: Select Live-Alarms, Stored-Events, Statistics, Rx-Params, or AUPC-
Param using the [
←][→] arrow keys, then press [ENT].
5.7.1 MONITOR: LIVE-ALARMS
LIVE UNIT= NONE NET= NONE
ALARMS RECV=DEMOD LOCK XMT= NONE
For the CDM-600: Per the example above, four alarm types are available on the CDM-600 on a
single screen.
For the CDM-600L: Six alarm types are available between two screens. In addition to the screen
example shown above for the CDM-600, this additional information is available by pressing the
[
↑][↓] arrow keys:
LIVE BUC= NONE
ALARMS LNB= NONE
The highest priority alarm currently active for each of the alarm types is shown in the tabulature
that begins on the next page.