beautypg.com

12 config: impedance (cdm-600 only), 13 config: statistics – Comtech EF Data CDM-600/600L User Manual

Page 106

background image

CDM-600/600L Open Network Satellite Modem

Revision 3

Front Panel Operation

MN/CDM600L.IOM

5–30

5.4.12 CONFIG: IMPEDANCE (CDM-600 ONLY)

IF IMPEDANCE = 50 (50,75 OHMS)

Select 50 or 75 using the [

][] arrow keys, then press [ENT]. Note that this affects both the Rx

and Tx IF ports simultaneously.

5.4.13 CONFIG: STATISTICS

LINK STATISTICS LOGGING INTERVAL:

10 MINUTES (00 to 90)

(

v)

The Logging Interval is the period of time over which the performance statistics will be
measured. Set the logging interval – 10 through 90 minutes in 10-minute increments – using the
[

][] arrow keys, then press [ENT]. Setting a value of 00 disables the feature (no logging).

For more information about the Statistics data taken, refer to Section 5.7.3 MONITOR:
STATISTICS.

To view the Statistic log information, from the ‘SELECT: (Main)’ menu, go to ‘MONITOR:
STATISTICS’.