Comtech EF Data CDM-600/600L - Manual (Page 179)

A-1
Appendix A. CABLE DRAWINGS
A.1 Introduction
The RS-530 standard pinout provided on the CDM-600/600L is becoming more popular in many applications. However, there are still
occasions, particularly with existing RS-422/449 and V.35 users, when a conversion must be made. For situations where such conversions
are required, refer to the following table to select the appropriate cable.
In addition, the standard RS-232 cable used for performing Flash Upgrading is depicted. This cable connects the CDM-600/600L Remote
Control Port to the serial communications port of an external PC.
App. A FIG CEFD P/N DESCRIPTION
A-1 CA/WR0049
Modem Conversion Cable:
RS-530
Æ RS-422/449 DCE Conversion (DB-25M ÆDB-25F, 40”)
A-2 CA/WR0059-2
Modem Conversion Cable:
RS-530
Æ V.35 Winchester DCE Conversion (DB-25M Æ Winchester 34-pin Female, 8’)
A-3 CA/WR9718-1
Modem Conversion Cable:
CDM
Æ RS-530 Conversion (DB-25M Æ DB-25F, 8’)
A-4 N/A
Modem Conversion Cable:
RS-530
Æ V.35 Winchester DCE Conversion (DB-25M Æ Winchester 34-pin Female)
A-5 N/A
RS-232 Switch Programming Cable (for Flash upgrading):
CDM-600/600L Remote Port
Æ PC Serial Port (DB-9F Æ DB-9F)
A-6 CN-0000268
E1/T1 Adapter
CDM-600/600L P7 Balanced G.703 Port
Æ Ethernet (DB-15M Æ RJ-48F)