Comtech EF Data CDM-600/600L - Manual (Page 250)

CDM-600/600L Open Network Satellite Modem Revision 3
Appendix E MN/CDM600L.IOM
E–20
E.3.3.2.3 KST SELECT: ALARMS
CURRENT STATUS: UP:OK REF:OK AGC:OK
P-SUPPLIES:OK DN:OK HPA:OK LNA:OK
This menu provides the user with access to continually-updated, read-only operational summary
information, as per the following tables:
Feature Abbreviation Designates
Detailed Status Display
Available? (Y/N)
UP Upconverter Y
REF Reference Y
AGC Auto Gain Control Y
P-SUPPLIES Power Supplies Y
DN Downconverter Y
HPA High Power Amplifier Y
LNA Low Noise Amplifier N
Summary Status
Abbreviation
Designates
OK OK – No Fault
FT Fault
NA Not Applicable
By using the [
←][→] arrow keys then pressing [ENT], the user may view more detailed status
information, as shown per the following examples (press [ENT] or [CLR] to return to the
previous menu):
UP-CONVERTER: COMMS:OK L-SYNTH:OK
OVER-TEMP:OK Ku-SYNTH:OK
REFERENCE:WARM 72M-LOCK:OK RANGE:NA
SOURCE:INT xREF-LOCK:NA PHASE:NA
AGC STATUS: EXCESS-POWER-IN:OK
LOOP-CONV:OK INSUFF-POWER-IN:OK
P-SUPPLIES: 7V:OK 17V:OK
-7V:OK 12V:OK (ENTER)
DOWN-CONVERTER: COMMS:OK L-SYNTH:OK
OVER-TEMP:OK Ku-SYNTH:OK
HPA: COMMS:OK 9.75V:OK
OVER-TEMP:OK BIAS:OK -CONV:5V:OK