Comtech EF Data CDM-600/600L User Manual
Page 225

CDM-600/600L Open Network Satellite Modem
Revision 3
Appendix D
MN/CDM600L.IOM
D–33
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
OGC Outdoor
Unit Global
Copy
(CDM-600L ONLY)
OGC=
50 Bytes
Command or Query
ODU Global Configuration of CDM-600L in the form:
aabcdemm:ssgggghhhhpp.pijklllnnnFFFFFSfffffsxxxxxx, where:
OGC=
OGC?
OGC*
OGC#
OGC?
OGC?n
OGC=aabcdemm:ssggggh
hhhpp.pijklllnnnFFFFFSffff
fsxxxxxx
(see Description of
Arguments)
Returns current OGC
configuration
Where n=0 to 9 returns the
OGC portion of 1 of 10
stored configurations (see
Description of Arguments)
aa=BUC Address
b=BUC Tx Output Power Enable
c=BUC Power Leveling Enable
d=BUC Power Supply State
e=BUC 10MHz Reference State
mm:ss=BUC Carrier Output Delay
gggg=BUC Low Alarm Limit
hhhh=BUC High Alarm Limit
pp.p=Output Target Power
i=LNB Voltage
j=LNB Power State
k=LNB 10MHz Reference
lll=LNB Low Alarm Limit
nnn=LNB High Alarm Limit
FFFFFS=TX LO Frequency
fffffs=RX LO Frequency
xxxxxx=Spare Bytes
same as OAD
same as OOP
same as OPL
same as ODP
same as ODR
same as OOD
same as ODL
same as ODH
same as OTP
same as LNV
same as LNB
same as LNR
same as LNL
same as LNH
same as TLO
same as RLO
A response to a query will fill any unavailable parameters with xxx.