Comtech EF Data CDM-600/600L - Manual (Page 217)

CDM-600/600L Open Network Satellite Modem Revision 3
Appendix D MN/CDM600L.IOM
D–25
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
RTC Time TIM= 6 bytes Command or Query.
The time in the form hhmmss, indicating the time from midnight, where:
hh = hours (00 to 23)
mm = minutes (00 to 59)
ss = seconds (00 to 59)
Example: TIM=231259 (23 hours:12 minutes:59 seconds)
TIM=
TIM?
TIM*
TIM# TIM? TIM=hhmmss
(see Description of
Arguments)
Unit Test
Mode TST= 1 byte, value of
0 thru 6 Command or Query.
Test Mode, where:
0= Normal Mode (no test)
1=Tx CW
2=Tx Alternating 1,0 Pattern
3=IF Loopback
4=RF Loopback
5=Digital Loopback
6=I/O Loopback
Example: TST=3 (IF Loopback)
TST=
TST?
TST*
TST# TST? TST=x
(see Description of
Arguments)