Comtech EF Data CDM-600/600L - Manual (Page 112)

CDM-600/600L Open Network Satellite Modem Revision 3
Front Panel Operation MN/CDM600L.IOM
5–36
5.6.7 INFO: EDMAC
EDMAC FUNCTION= ON
EDMAC MODE= MASTER EDMAC ADDR= 0020
This screen shows if EDMAC is enabled or not. When enabled, the EDMAC Mode and Address
are shown.
5.6.8 INFO: DROP (Drop Type)
DROP TYPE= CH:1
E1-CCS TS:01
This screen shows the Drop Type and channel allocations. Press [ENT] or [CLR] to return to the
previous menu.
5.6.9 INFO: INSERT (Insert Type)
INSERT TYPE= CH:1
E1-CCS TS:01
This screen shows the Insert Type and channel allocations. Press [ENT] or [CLR] to return to the
previous menu.
5.6.10 INFO: REMOTE
REMOTE-CONTROL= LOCAL ADDRESS= 0000
INTERFACE = RS-232 9600 BAUD N81
This screen shows if the unit is in Local or Remote mode, provides the details of the electrical
interface type selected, the unit’s address, and the baud rate. Press [ENT] or [CLR] to return to
the previous menu.
5.6.11 INFO: ALARM-MASK
ALARMS MASKED: TX-AIS RX-AIS BUF-SLIP
AGC EBNO SAT TERR
This modem screen shows only the alarm(s) that are currently masked, though all are shown in
this example. If an alarm is not masked, a blank is displayed in the relevant screen position.