beautypg.com

Appendix c. fast activation procedure, C.1 introduction, C.2 activation procedure – Comtech EF Data CDM-600/600L User Manual

Page 191: C.2.1 serial number, C.2.2 view currently installed features

background image

C–1

Appendix C. FAST ACTIVATION

PROCEDURE

C.1

Introduction

Fully Accessible System Topology (FAST) is an enhancement feature available in Comtech EF
Data products, enabling on-location upgrade of the operating feature set – in the rack – without
removing a modem from the setup.

This accelerated upgrade can be accomplished only because of FAST’s extensive use of
programmable devices incorporating Comtech EF Data-proprietary signal processing techniques.
These techniques allow the use of a unique access code to enable configuration of the available
hardware.

The access code can be purchased at any time from Comtech EF Data. Once obtained, the access
code is loaded into the unit via the front panel keypad.

C.2

Activation Procedure

C.2.1

Serial Number

Obtain the Modem serial number as follows:

a. From the SELECT: (Main) menu, select FAST, then press [ENT].

b. The Modem motherboard Serial Number is displayed on the FAST menu bottom line, to

the left.

c. Record the Serial Number: ______________________________

C.2.2

View currently installed features

To view the currently installed features, proceed as follows:

a. From the SELECT: (main) menu, select FAST: VIEW, then press [ENT].

b. Use the [

][] arrow keys to scroll through the Modem Options and note which are

Installed’ or ‘Not Installed’: