Baby Lock Palette 10 (ECS10) Instruction Manual - Manual (Page 54)

53
Specifying Thread Colors and Sew Types for Lines and Regions
■ Reversing the sewing direction
1
Select the Select Point tool.
2
Click a shape pattern.
3
Click the [Shapes] tab.
4
Click [Reverse Direction Line] in the
[Sewing Direction Line] group.
If there are multiple sewing direction lines, all
lines will be reversed.
■ Deleting sewing direction lines
1
Select the Select Point tool.
2
Click a shape pattern, and then click an empty
square or empty triangle on the sewing
direction line to select the point.
3
Click the [Shapes] tab.
4
Click [Delete Direction Line] in the [Sewing
Direction Line] group, and then click [Delete
Selected Line] or [Delete Lines Not
Selected].
Delete Selected Line
Click this command to delete the selected
sewing direction line. Otherwise, press the
key to delete the sewing direction.
Delete Lines Not Selected
Click this command to delete all sewing
direction lines except the currently selected
one. The sewing direction will become
uniform.
b
The sewing angle can also be set to a specific
direction (one sewing direction line) with the
settings under [Direction] in the [Sewing
Attributes] pane.
cc
"Specifying sewing attributes" on page 54