Baby Lock Palette 10 (ECS10) Instruction Manual - Manual (Page 199)

198
O
p
er
at
io
n
s f
o
r S
p
eci
fic Ap
p
lic
at
io
n
s
Using Manual Punch Tool
3
Click points 1 through 4, in order.
4
Select the Curve tool.
Click in the [Input] group of the
[Manual Punch] tab.
5
Click points 5 through 11, in order.
Click point 12 (last point of the pattern part),
and then press the key.
6
Click in the [Input] group of the
[Manual Punch] tab.
7
Click point 13, then point 14 (last point of
running stitching connecting the parts), and
then press the key.
Specify the point so that it overlaps/connects
the part created in step
5
.
8
Click in the [Input] group of the
[Manual Punch] tab.
9
Click points 15 through 23, in order.
Click point 24 (last point of the pattern part),
and then press the key.
Specify the point so that it overlaps/connects
the part created in step
7
.
10
Click in the [Input] group of the
[Manual Punch] tab.
b
To remove an entered point, right-click it or press
the key.
b
Instead of pressing the key, the pattern
part can be completed by double-clicking.
1 2
3
4
6
5
10
7
8
9
11
12
13
14
16
15
19
17
18
23
21
22
24
20