Baby Lock Palette 10 (ECS10) Instruction Manual - Manual (Page 247)

246
Des
ign
Databas
e
Transferring Embroidery Designs to Machines
Transferring Embroidery Designs to
Machines
1
Prepare the media to be used to make the
transfer, or connect an embroidery machine to
the computer.
2
Click .
1 Contents pane (Available designs)
2 Writing list (Selected designs)
a
The procedures for transferring the created embroidery design to an embroidery machine differ depending
on your embroidery machine model. For detail, refer to the Operation Manual provided with your embroidery
machine.
Transferring to a machine
by using USB media/USB
cable/original card
a
Be sure that the hoop size of the design does not
exceed the hoop that will be used on the
embroidering machine.
b
• If the design is to be written to an original card,
insert the original card into the USB card writer
module.
• If the design is to be written to USB media, plug
the USB media into the computer.
• If the design is to be transferred directly to an
embroidery machine, connect the embroidery
machine to the computer. For details on
transferring design, refer to the Operation
Manual provided with your embroidery machine.
• In order to use the Link function to transfer
embroidery designs, an embroidery machine
compatible with the Link function must be
running in Link mode.
cc
"Using the Link Function to Embroider From
the Computer" on page 204
1 2