Baby Lock Palette 10 (ECS10) Instruction Manual - Manual (Page 335)

334
M
enus
/T
ools
a
nd Re
fe
re
nc
e
Sewing Attributes
Programmable fill
Click to display the [Browse] dialog box. Select a folder, and then select the desired
pattern (.pas file) from the list of patterns that appears.
Specify the pattern size. The pattern can
be enlarged or reduced while maintaining
the width-to-height proportion.
Smaller Larger
1 Height
(vertical
length)
Specify the pattern
height.
Short Tall
2 Width
(horizontal
length)
Specify the pattern
width.
Short Long
Maintain aspect ratio When selected, the height-to-width proportions of the pattern are maintained.
Direction
Offset
row 0%
Row 50% Column 50%
column
Base Sewing
To specify base stitching, select the check box, and then specify settings for the following
attributes.
Stitch Type
Specify the shape of the returning ends
of the stitching.
This cannot be specified if the sewing
direction is set to [Auto].
Step pitch Specify the length of one stitch.
Short Long
Frequency
0% 50%
1
2
45°
0°
315°
90°
135°
180°
225°
270°
Area where the embossing or
engraving effects are applied
This area is sewn with the stitching settings
specified for the base sewing of the
programmable fill stitch.
This area is sewn with the stitching settings
specified by the pattern file.
Pattern