Baby Lock Palette 10 (ECS10) Instruction Manual User Manual
Page 172

171
Tutorial 8-3: Creating a Cutwork Pattern Filled with Net Stitching
5
Specify cutting line type in [Cutting Line].
Select whether the fabric will be cut along the
cutting line or whether the cutting line will
remain as running stitches.
For this example, select [Cutting].
6
Specify securing of the water-soluble
stabilizer in [Secure Water-Soluble
Stabilizer].
Running stitches will be sewn to secure the
water-soluble stabilizer after the fabric has
been cut. In order to prevent embroidery from
losing its shape after it has been cut, place
water-soluble stabilizer in the cutout areas
and sew it in place.
For this example, select [Yes].
7
Specify net fill stitching inside the cutout areas
in [Net Fill].
By sewing net fill stitching in cutouts, inner
cutouts can be reinforced while allowing for a
greater design variety.
For this example, select [Yes].
Select the parameters according to the
procedure from step
8
to
10
, when [Net Fill]
is set to [Yes].
8
Specify the net fill stitch pattern in [Pattern].
Five net fill stitch patterns are available.
For this example, select [Pattern 2].
Cutting
In order for this setting
to be available
cc
"Basic
requirements for
Cutwork
functions" on
page 173
Select this setting to
cut the fabric with a
machine installed with
cutwork needles.
Running Stitch
Select this setting to
sew the cutting line,
then cut along the
cutting line with
scissors.
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Pattern 5