Baby Lock Palette 10 (ECS10) Instruction Manual - Manual (Page 53)

52
Specifying Thread Colors and Sew Types for Lines and Regions
B
asic
L
ayo
u
t & E
d
it
in
g
Op
e
rat
io
n
s
■ Specifying multiple sewing
directions
1
Click the [Home] tab.
2
Click [Select] in the [Select] group, and then
click to select the Select Point tool.
3
Click a shape pattern.
 The sewing direction lines appear.
4
Click the [Shapes] tab.
5
Click [Add Direction Line] in the [Sewing
Direction Line] group.
6
Click the point for one end of the sewing
direction line being added, and then click the
point for the other end.
■ Changing the sewing angle
1
Select the Select Point tool.
2
Click a shape pattern, and then click an empty
square or empty triangle on the sewing
direction line to select the point.
3
Drag the point to the new location.
2
1
b
• Specify the sewing direction lines as described
below.
 Position both end points outside of the pattern.
 Only the lines can be positioned over the
pattern.
 When specifying multiple sewing direction
lines, they must not intersect within the
pattern.
Sewing direction lines specified in any way other
than described above will not be added.
a
If hole sewing has been applied, sewing direction
lines cannot be added.
Selected point