213 basic design center operations 6, Using the eraser 1, Using the pen 1 – Baby Lock Palette 10 (ECS10) Instruction Manual User Manual
Page 214: Step 2 line image stage

213
Basic Design Center Operations
6
In the image displayed in the [Pick Colors]
window, select the colors to be used for the
outlines (embroidery lines).
The selected color appears in a box on the
right side, and
appears in the check box
to show that the color is selected.
7
After selecting the colors to be used for the
outlines, click [OK].
The line image appears in the Design
Page.
■
Using the Eraser
1
To erase a line, click [Eraser] in the [Tools]
group, and then select a tool
according to
the size of the area or thickness of the line to
be erased.
2
Move the pointer over the line to be erased,
and then click the line or drag the pointer to
erase the line.
■
Using the Pen
1
To draw lines, select the [Pen] in the [Tools]
group, and then select a tool
with the
desired thickness of the line to be drawn.
If a color other than that for the outline
was selected, clear the check box
beside the color to deselect it.
The desired color can be selected more
easily if the [Zoom] slider is used to
enlarge the image.
Step 2
Line Image Stage