175 on using the cutwork functions, Transferring, Saving – Baby Lock Palette 10 (ECS10) Instruction Manual User Manual
Page 176

175
On Using the Cutwork Functions
5 Checking Design Property
When [Cutting] has been assigned to a line
from the [Line sew type] selector, [Design
Property] screen appears as shown below.
In addition to transferring cutwork patterns to a
machine, they can be saved or printed.
■
Transferring
Transferring using USB media
By using commercially available USB media,
cutwork patterns can be transferred to embroidery
machines compatible with the USB media.
cc
"Transferring to a machine by using USB
media" on page 201
Transferring directly to a machine's
memory
Cutwork patterns can be transferred to embroidery
machines that can be connected to a computer
using a USB cable.
cc
"Transferring directly to a machine's
memory" on page 201
■
Saving
Saving cutwork patterns in the PES format
For details, refer to "Saving and Printing" on
page 95.
b
[Color order] can be also viewed in the [Design
Property] screen in the Design Database.
a
• In patterns with [Cutting] selected in the [Line
sew type] selector, the line color and region
sewing settings are not available.
• Designs containing the line sew type [Cutting]
are saved as cutwork patterns.
cc
"Transferring/saving/exporting the cutwork
patterns" on page 175
• Created cutwork patterns can be used only with
embroidery machines upgraded for cutwork.
• With Palette Ver.10, the line sew type [Cutting]
changes to [Running Stitch] in the following
situations.
When the [Machine Type] setting (on the
[Design Page] tab of the [Design Settings]
dialog box) is changed from a multi-needle
embroidery machine to a single-needle
embroidery machine
When a cutwork pattern is imported while
[Machine Type] (on the [Design Page] tab) is
set to a single-needle embroidery machine
• Cutwork pattern cannot be transferred to a
machine by using an original card or the Link
function.
• Cutwork pattern cannot be created in Design
Center. To set the line sew type to [Cutting],
use Layout & Editing.
Transferring/saving/
exporting the cutwork
patterns
a
• Cutwork patterns cannot be transferred to a
machine by using an original card or the Link
function.
• The cutwork patterns can be transferred to
embroidery machine only after the upgrade for
cutwork has been installed and certified to the
machine.
a
Designs containing the line sew type [Cutting] are
saved as cutwork patterns.