Baby Lock Palette 10 (ECS10) Instruction Manual - Manual (Page 148)

147
Advanced Stitch Wizard Operations
Advanced Stitch Wizard Operations
Click at the top of the window (in the [Quick
Access Toolbar]) to display the Startup Wizard,
and then click [Create Embroidery Patterns Using
Images]. If an image has been imported, the next
dialog box appears.
a
Sample image before being converted
b
Sample image of embroidery pattern
after being converted
c
Select the conversion method.
d
Select to start up Design Center and
import the image into the Design Page.
e
Description of conversion method
f
Click to continue to the next step.
■ Select Mask dialog box
The [Select Mask] dialog box appears no matter
which conversion method was selected.
a
Mask shapes
The image will be masked with the
selected shape.
b
The mask can be reshaped or
repositioned. Select the tool appropriate
for the operation to be performed.
: Drag the handles to enlarge/
reduce the mask. Drag the mask
to adjust its position.
: Points can be entered, moved and
deleted to create a mask with the
desired shape.
To add points, click the outline of
the mask. To move a point, select
the point, and then drag it. To
delete points, select the point, and
then press the key.
Image To Stitch Wizard
b
If no image has been imported into the Design
Page, the [Open an image file] dialog box
appears.
a
b
c
d
e
f
Adjusting the Mask and
Image
a
With a small original image, it may not be possible
to reduce the size of the mask.
a b d
e
f f c